SPR - Surface Plasmon Resonance
At an interface between two transparent
media of different refractive index (glass and
water), light coming from the side of higher refractive
index is partly reflected and partly refracted.
Above a certain critical angle of incidence, no
light is refracted across the interface, and total
internal reflection is observed. While incident
light is totally reflected the electromagnetic
field component penetrates a short (tens of nanometers)
distance into a medium of a lower refractive index
creating an exponentially detenuating evanescent
wave. If the interface between the media is coated
with a thin layer of metal (gold), and light is
monochromatic and p-polarized, the intensity of
the reflected light is reduced at a specific incident
angle producing a sharp shadow (called surface
plasmon resonance) due to the resonance energy
transfer between evanescent wave and surface plasmons.
The resonance conditions are influenced by the
material adsorbed onto the thin metal film. Satisfactory
linear relationship is found between resonance
energy and mass concentration of biochemically
relevant molecules such as proteins, sugars and
DNA. The SPR signal which is expressed in resonance
units is therefore a measure of mass concentration
at the sensor chip surface. This means that the
analyte and ligand association and dissociation
can be observed and ultimately rate constants
as well as equilibrium constants can be calculated.
|